W. H Rea Engineering.
W. H Rea Engineering.

Calf Pens, Dehorning etc.

Calf Pens.

 

Calf Pens - Standard - SOLID Side Pens

 

Width:                                                        30"

Length:                                                       54"

Height (overall):                                      50"

Height: (from floor)                                40"

 

Calf Pens - Standard - RAILED Side Pens

 

available in either sheeted or railed sides or even a combination of both to fully comply with EC recommendations (while it lasts).

 

Calf Pens - standard

 

Long lasting -

 

This is a picture of a run of railed calf pens which has seen season long work since first supplied back in 1992. The galvanising may have dulled somewhat and the slatted floors may have been replaced but  they still look and perform the same as they did when first supplied.

Shown here without the hayracks 

 

 

Calf Pens - standard

 

Plenty of space

  • All steel construction with pressure treated timber slatted floor.
  • Easy assembly in two to three minutes
  • Flat pack storage.
  • Supplied with either fully solid sides or a combination of both
  • (complies with EC recommendations).
  • Each pen is supplied complete with two bucket holder rings and one hayrack for every two pens.

 

Calf Pens - On bedded ground

 

Width:                                                        30"

Length:                                                       54"

Height: (from ground)                            40"

 

Calf Pens - On bedded ground

 

Width:                                                        30"

Length:                                                       54"

Height: (from ground)                            40"

  • Desgined to suit some of the newer houses with no floors and bedding on a well drained base
  • Easy assembly in two to three minutes
  • Flat pack storage.
  • Can be mounted back to back using the special solid `back to back` panel
  • Supplied with either fully solid sides or a combination of both
  • (complies with EC recommendations).
  • Each pen is supplied complete with two bucket holder rings and one hayrack for every two pens.

 

Calf Pens - On bedded ground

 

showing `Back to Back` panel

 

Calf Pen Block - On bedded ground

 

To ground style Multiple Block of two or more pens which are easy to lift in and out with loader etc..

Blocks can be left built or dismantled in a matter of seconds as everything pins together but is super ridged for lifitng purposes.

Calf De-Horning Crates.

Large.

 

Calf De-Horning Crate - Large

 

 

Length:                                 118 5mm
Width:                                    480 mm (420 mm inside)
Height:                                  1195 mm
Weight:                                     75 Kg

 

Calf De-Horning Crate - Large

 

 

 

  • Fully adjustable ratchet head yoke c/w wooden face support plate and rope restraint.
  • Front opening gate.
  • Rear side access gates.
  • Belly Strap.
  • Rear backing up bar.
  • Wheels and handles as standard.
  • Galvanised finish as standard with wooden slatted floor.

Medium.

 

Calf De-Horning Crate - Medium

 

Length:                                  1170mm
Width:                                     440mm (390mm inside)
Height:                                    900mm

Weight:                                     75 Kg

 

Calf De-Horning Crate - Medium

 

Shown with optional Wheel Kit

 

Calf De-Horning Crate - Medium

 

  • Adjustable head yoke heights.
  • Quick acting belt and cam to hold nose in place.
  • `Wrap around` belt system on quick acting cam to secure calf from either jumping up or falling down while inside the crate.
  • Rear backing up bar.
  • Optional wheel kit.

Galvanised finish as standard with open steel floor as standard (timber  floor option )

Small.

 

Calf De-Horning Crate - Small

 

Length:                                   870mm
Width:                                     400mm (360mm inside)
Height:                                    870mm

Weight:                                   60 Kg
 
 
  • Adjustable head joke heights.
  • Belt to hold nose in place along with adjustable pull chain
  • Rear anti backing bar.
  • Supplied galvanised with wooden slatted floor

Contact details

W. H Rea Engineering.

290 Lisnevenagh Road,

Antrim

BT41 2JL

 

Tel: 02894 462 193 02894 462 193

 

Alternatively, please use our contact form. Contact Us

Tweets from WH Rea Engineering @WHReaEng

News

A big thank you to the guys at Rea Engineering for a wonderful job.

We got in a dispute with the developer who never finished the development to spec, all the residents got together to agree on fitting new gates and railings.   W. H Rea Engineering.were pivotal in gaining agreement on the gate designs plus the induvidual automation requirements, and costs.

Thank you for making a complex issue... simple.

Eoin
Local Resident                 

 

Hi Gilbert, 
            Many thanks for the fantastic gates – they completely change the look of our house.
The detail  and design of the gates really complements the house and garden.

Regards

Stephen
Rhanbuoy Park

Tender accepted

Successful ideas:

The contract for a major project on Dublin Road , Belfast has been awarded to W. H Rea Engineering., by May Estates Ltd .

More news to follow........

Print Print | Sitemap
©2017 W. H Rea Engineering.